Calibration Business

Calibration Business

ISO/IEC 17025 accredited for radiometry, pressure and temperature.

We are proud to announce that we joined the finest laboratories in the world to be ISO/IEC 17025 accredited for radiometry, pressure and temperature.

Certification
Certification

Calibrated Products according to ISO/IEC 17025 from Suga Test Instruments. Co.,Ltd.

Products Range
Radiometer for Water-Cooled Xenon Lamp Xenon lamp filter condition
Extended UV filter
(40 to 180) W/㎡
(300 to 400) nm
Xenon lamp filter condition
Daylight filter
(40 to 180) W/㎡
(300 to 400) nm
Xenon lamp filter condition
Windowglass filter
(40 to 162) W/㎡
(300 to 400) nm
Standard Lamp with Spectral Irradiance (Spectral Irradiance Standard Source) 500W Tungsten lamp (250 to 850) nm
Water-Cooled
Xenon Lamp
Xenon lamp filter condition Extended UV filter, Daylight filter, Windowglass filter (300 to 850) nm
Platinum Resistance Thermometer Sensor Φ6.4×L150 mm(SUS316 sheath),
Φ6×L150mm(Titanium)
Φ3×L50 mm(SUS316 sheath),
Φ6.4×L120 mm(SUS316 sheath),
Float switch
(0 to 70) ℃
Pressure Gage Φ100mm, Φ50mm
Full Scale 0.2MPa
(0.05 to 0.18) MPa
Φ60mm
Full Scale 0.3MPa
(0.03 to 0.25) MPa
Φ100mm
Full Scale 0.4MPa
(0.04 to 0.35) MPa
Φ60mm
Full Scale 0.4MPa
(0.1 to 0.36) MPa
Φ100mm
Full Scale 1.0MPa
(0.1 to 0.8) MPa

Note: The calibration of each Platinum resistance thermometer sensor, Pressure gage and Radiometer can be conducted arbitrary calibration points within above range.

Accurate calibration of test instruments according to ISO/IEC 17025 is essential.

SUGA’s Calibration division is accredited to meet the requirements for MRA of ILAC by ANAB. This is conformitiy with ISO/IEC 17025.

ISO/IEC 17025 : General requirements for the competence of testing and calibration laboratories
MRA : Mutual Recognition Arrangement
ILAC : International Laboratory Accreditation Cooperation
ANAB : The American National Standards Institute(ANSI)- American Society for Quality (ASQ) National Accreditation Board

pagetop